logo
Σφραγίδα

Λεπτομέρειες για το blog

Created with Pixso. Σπίτι Created with Pixso. Μπλογκ Created with Pixso.

On Bearing Requirements Under High Temperatures

On Bearing Requirements Under High Temperatures

2026-11-17

Recently, I have been serving a customer from Greece, with email communications stretching over one or two months. My biggest feeling is that high temperatures impose stringent quality requirements on bearings. As I am new to the bearing industry, my knowledge in this field is still limited. Here I will briefly elaborate on two key points: the matching of grease and seals.

τα τελευταία νέα της εταιρείας για On Bearing Requirements Under High Temperatures  0

The customer’s initial requirement was for bearings to operate at a maximum temperature of 200°C for 2 hours, with 18 hours of daily operation. The standard grease from our factory is only rated for a peak temperature of 150°C. This posed a challenge for us. Supplying special grease to withstand 200°C for two hours would push the price significantly higher, which would hardly be acceptable to the customer.We therefore communicated repeatedly with the customer to clarify the maximum and minimum operating temperatures, the duration at peak and low temperatures, as well as the critical threshold temperature and working hours. After rounds of discussions, we confirmed that the actual maximum working temperature was 150°C with a maximum duration of 1 hour. The communication journey was winding, yet the outcome was ideal — we found suitable grease for the application.

τα τελευταία νέα της εταιρείας για On Bearing Requirements Under High Temperatures  1

Once the grease issue was resolved, the seal problem arose. A temperature of 150°C places heavy demands on bearing seals. Our standard products adopt conventional NBR seals, which would degrade under prolonged operation at 150°C.We then proposed three seal options for the customer: an upgraded seal better than the standard version, ACM acrylic rubber seals, and FKM seals.

· The upgraded seal offers a working temperature range 20% higher than ordinary seals.

· ACM acrylic rubber seals can withstand 150°C, but come with a 50% price increase.

· FKM seals tolerate temperatures up to 200°C, yet the price doubles.

None of these three options satisfied the customer. To cut costs, we finally switched to metal shields. Metal shields can withstand high temperatures, maintain stable bearing performance, and come at a low cost, perfectly resolving the customer’s issue.

 

This case has deepened my understanding of bearings and enriched my product knowledge, bringing me one step closer to providing better customer service. I appreciate the company’s support for my business work. Thank you, bearings, for growing alongside me.

 

τα τελευταία νέα της εταιρείας για On Bearing Requirements Under High Temperatures  2

Any question pls feel free to contact me:

Web:www.motor-bearings.com

Email:info@bgbearing.com

Mobile/wechat: +86-19957426729  whatsapp:15958241700

 

 

 

Σφραγίδα
Λεπτομέρειες για το blog
Created with Pixso. Σπίτι Created with Pixso. Μπλογκ Created with Pixso.

On Bearing Requirements Under High Temperatures

On Bearing Requirements Under High Temperatures

Recently, I have been serving a customer from Greece, with email communications stretching over one or two months. My biggest feeling is that high temperatures impose stringent quality requirements on bearings. As I am new to the bearing industry, my knowledge in this field is still limited. Here I will briefly elaborate on two key points: the matching of grease and seals.

τα τελευταία νέα της εταιρείας για On Bearing Requirements Under High Temperatures  0

The customer’s initial requirement was for bearings to operate at a maximum temperature of 200°C for 2 hours, with 18 hours of daily operation. The standard grease from our factory is only rated for a peak temperature of 150°C. This posed a challenge for us. Supplying special grease to withstand 200°C for two hours would push the price significantly higher, which would hardly be acceptable to the customer.We therefore communicated repeatedly with the customer to clarify the maximum and minimum operating temperatures, the duration at peak and low temperatures, as well as the critical threshold temperature and working hours. After rounds of discussions, we confirmed that the actual maximum working temperature was 150°C with a maximum duration of 1 hour. The communication journey was winding, yet the outcome was ideal — we found suitable grease for the application.

τα τελευταία νέα της εταιρείας για On Bearing Requirements Under High Temperatures  1

Once the grease issue was resolved, the seal problem arose. A temperature of 150°C places heavy demands on bearing seals. Our standard products adopt conventional NBR seals, which would degrade under prolonged operation at 150°C.We then proposed three seal options for the customer: an upgraded seal better than the standard version, ACM acrylic rubber seals, and FKM seals.

· The upgraded seal offers a working temperature range 20% higher than ordinary seals.

· ACM acrylic rubber seals can withstand 150°C, but come with a 50% price increase.

· FKM seals tolerate temperatures up to 200°C, yet the price doubles.

None of these three options satisfied the customer. To cut costs, we finally switched to metal shields. Metal shields can withstand high temperatures, maintain stable bearing performance, and come at a low cost, perfectly resolving the customer’s issue.

 

This case has deepened my understanding of bearings and enriched my product knowledge, bringing me one step closer to providing better customer service. I appreciate the company’s support for my business work. Thank you, bearings, for growing alongside me.

 

τα τελευταία νέα της εταιρείας για On Bearing Requirements Under High Temperatures  2

Any question pls feel free to contact me:

Web:www.motor-bearings.com

Email:info@bgbearing.com

Mobile/wechat: +86-19957426729  whatsapp:15958241700